This page uses CSS to present the content in the best possible manner.
If you can see this message, then CSS is not enabled in your browser,
and the page will not appear as the designer intended.
QUB FEM Group Publications
Kok Yong Lee, Mark Price, Cecil Armstrong
"ViSiCADE - a Virtual Simulation Environment for Seamless Integration of CAD/CAE into VR", (2004)
Irish Signals and Systems Conference.
Abstract Download
Butterfield J., Yao H., Benard E., Price M., Cooper R., Monaghan D., Armstrong C.G., Raghunathan S.
"Investigation of Weight Reduction in a Thrust Reverser Cascade Using Aerodynamic and Structural Integration", (2003)
44th AIAA/ASME/AHS Structures, Structural Dynamics and Materials Conference, Norfolk, Virginia.
Abstract
Butterfield J., Yao H., Price M., Armstrong C.G., Raghunathan S., Riordan D., Cathers G.
"Methodologies for Structural Optimisation of a Thrust Reverser Cascade Using a Multidisciplinary Approach", (2003)
AIAA 41st Aerospace Sciences Meeting and Exhibit, Reno, Nevada.
Abstract
Lee K. Y., Price M.A., Armstrong C.G., Larson M., Samuelsson K.
"CAD to CAE Integration through Automated Model Simplification and Adaptive Modelling", (2003)
International Conference on Adaptive Modeling and Simulation.
Abstract Download
Armstrong C.G.
"Integrating Analysis and Design - Thoughts for the Future", (2002)
State of the Art in CAD/FE Integration - NAFEMS Awareness Seminar, Chester, UK.
Download
Armstrong C.G., Monaghan D.J., Price M.A., Ou H., and Lamont J.
"Integrating CAE Concepts with CAD Geometry", (2002)
The 3rd International Conference on Engineering Computational Technology, Prague, Sept 4 – 7,.
Menary, G.H., Armstrong, C.G, McEvoy, J.P.,
"A web based user friendly interface for simulating injection stretch blow moulding", (2002)
ANTEC Technical Proceedings.
K. W. Shim, Dermot J. Monaghan, Cecil G. Armstrong
"Mixed Dimensional Coupling in Finite Element Stress Analysis", (2002)
Engineering with Computers, Vol.18, No.3, pp.241-252.
Pin Yang Ang, Cecil G. Armstrong
"Adaptive Shape-Sensitive Meshing of the Medial Axis", (2002)
Engineering with Computers, Vol.18, No.3, pp.253-264.
Shim K.W., Monaghan D.J. and Armstrong C.G.
"Mixed Dimensional Coupling in Finite Element Stress Analysis", (2001)
10th International Meshing Roundtable, Sandia National Laboratories, Newport Beach, California, pp.269-277.
Abstract Download
Shim K.W. and Armstrong C.G.
"2D-1D Coupling of Composite Structures", (2001)
Proc. 9th ACME Conference, Birmingham, UK, pp.119-122.
Abstract Download
Kwok P.S., Menary G.H., Armstrong C.G, McEvoy J.P.,
"Development of a Web based user friendly interface using ABAQUS", (2001)
Proc. UK ABAQUS Users Group Conference.
Menary G.H., Armstrong C.G, McEvoy J.P.,
"Prediction of the in service behaviour of PET carbonated soft drink containers", (2001)
4th international ESAFORM conference on Material Forming, Liege, Belgium, pp.369-372.
Ang P.Y. and Armstrong C.G.
"Adaptive Curvature-Sensitive Meshing Of The Medial Axis", (2000)
Proc. 10th Int. Meshing Roundtable, Sandia National Laboratories, Newport Beach, California.
Abstract Download
Monaghan D.J., Lee K.Y., Armstrong C.G. and Ou H.
"Mixed Dimensional Finite Element Analysis of Frame Models", (2000)
Proc. 10th ISOPE conference, May 28-June 2, Seattle, USA, Vol.4, pp.263-269, ISBN: 1-880653-50–8.
Abstract Download
Monaghan D.J. and Armstrong C.G.
"Mixed Dimensional Coupling for Efficient Structural Finite Element Analyses", (2000)
Proc. 7th ACME conference, Greenwich, UK.
Abstract Download
Butterfield J., Yao H., Price M., Armstrong C.G., Raghunathan S., Riordan D., Cathers G.
"Methodologies for Structural Optimisation of a Thrust Reverser Cascade Using a Multidisciplinary Approach", (2000)
AIAA 41st Aerospace Sciences Meeting and Exhibit, Reno, Nevada, pp.2003.
Abstract
Monaghan D.J., Doherty I.W., McCourt D. and Armstrong C.G.
"Coupling 1D Beams to 3D Bodies", (1998)
Proc. 7th Int. Meshing Roundtable, Sandia National Laboratories, Dearborn, Michigan.
Abstract Download
Armstrong C.G., Bridgett S.J., Donaghy R.J., McCune R.W., McKeag R.M. and Robinson D.J.
"Techniques for Interactive and Automatic Idealisation of CAD Models", (1998)
Proc. 6th Int. Conf. on Numerical Grid Generation in Computational Field Simulations, London, UK, pp.643-662.
Abstract Download
Armstrong C.G., McCune R.W., and RobinsonD.J.
"Multi-Dimensional Analysis Modelling", (1998)
Proc. 6th ACME Conference, Exeter, UK, pp.47-50.
Li T.S., Armstrong C.G. and McKeag R.M.
"Quad Mesh Generation for k-sided Faces and Hex Mesh Generation for Trivalent Polyhedra", (1997)
Finite Elements in Analysis and Design, Vol.26, pp.279-301.
OGorman N., Armstrong C.G. and McKeag R.M.
"Computation of a Boundary Conforming Triangulation", (1997)
NAFEMS World Congress.
Price M.A. and Armstrong C.G.
"Hexahedral Mesh Generation by Medial Surface Subdivision: Part II. Solids with Flat and Concave Edges", (1997)
International Journal of Numerical Methods in Engineering, Vol.40, pp.111-136.
Sheehy D.J., Armstrong C.G. and Robinson D.J.
"Shape Description by Medial Surface Construction", (1996)
IEEE Trans Visualization & Computer Graphics, Vol.2, pp.62-72.
Donaghy R.J., McCune R.W., Bridgett S.J., Armstrong C.G., Robinson D.J. and McKeag R.M.
"Dimensional Reduction of Analysis Models", (1996)
Proc. 5th Intl Meshing Roundtable, Sandia National Laboratories, Pittsburgh, USA, pp.307- 320.
Download
Armstrong C.G., Donaghy R.J., and Bridgett S.J.
"Derivation of Appropriate Idealisations in Finite Element Modelling", (1996)
Advances in Finite Element Technology, Civil-Comp Press, pp.11-20.
Download
Benham P.P., Crawford R.J. & Armstrong C.G.
"Mechanics of Engineering Materials, 2nd edition", (1996)
Longman Group Ltd, ISBN: 0582251648.
Robinson D.J. and Armstrong C.G.
"Geodesic Paths for General Surfaces Generated by Solid Modellers", (1996)
The Mathematics of Surfaces, Clarendon Press, Oxford, Vol.VI, pp.103-117.
Sheehy D.J., Armstrong C.G. and Robinson D.J.
"Numerical Computation of Medial Surface Vertices", (1996)
The Mathematics of Surfaces, Clarendon Press, Oxford, Vol.VI, pp.549-569.
Download
Armstrong C.G., Robinson D.J., McKeag R.M., Li T.S., Bridgett S.J., Donaghy R.J. and McGleenan C.A.
"Medials for Meshing and More", (1995)
Proceeding 4th International Meshing Roundtable, Sandia National Laboratories, Albuquerque, New Mexico.
Armstrong C.G., Robinson D.J., McKeag R.M., Li T.S., Bridgett S.J. and Donaghy R.J.
"Applications of the Medial Axis Transform in Analysis Modelling", (1995)
Proc 5th NAFEMS Int Conf on 'Reliability of FE Methods for Engineering Applications', pp.415-426.
Price M.A., Sabin M.A. & Armstrong C.G.
"Fully Automatic Quad and Hex Meshing", (1995)
Proc 5th NAFEMS Int Conf on 'Reliability of FE Methods for Engineering Applications'.
Sheehy D.J., Armstrong C.G. and Robinson D.J.
"Computing the Medial Surface of a Solid from a Domain Delaunay Triangulation", (1995)
ACM/IEEE Symposium on Solid Modeling and Applications, Salt Lake City, USA.
Li T.S., McKeag R.M. and Armstrong C.G.
"Hexahedral meshing using midpoint subdivision and integer programming", (1995)
Computer Meth Appl Mech Engrg, Vol.124, pp.171-193.
Price M.A., Armstrong C.G. and Sabin M.A.
"Hexahedral mesh generation by medial surface subdivision: I Solids with convex edges", (1995)
International Journal of Numerical Methods in Engineering, Vol.38, pp.3335-3359.
Li T.S.
"Meshing and Substructuring of 3D Stress Analysis Models", (1994)
PhD thesis, QUB.
Download
Li T.S., Armstrong C.G. and McKeag R.M.
"Automatic Partitioning of Analysis Models using the Medial Axis Transform", (1994)
Advances in Parallel and Vector Processing for Structural Mech, pp.165-171.
Download
Armstrong C.G.
"Modelling requirements for finite-element analysis", (1994)
Computer-Aided Design, Vol.26, pp.573-578.
Armstrong C.G., Toh C.L., Robinson D.J. and Li T.S.
"Adaptive hexahedral meshing using solid primitives", (1993)
Proc. 4th NAFEMS Internation Conf on Quality Assurance and Standrads in Finite Element and Associated Technologies, Brighton, UK, pp.85-96.
Download
Tam T.K.H. and Armstrong C.G.
"Finite element mesh control by integer programming", (1993)
International Journal for Numerical Methods in Engineering, Vol.36, pp.2581-2605.
Tam T.K.H. and Armstrong C.G.
"2D finite element mesh generation by medial axis subdivision", (1991)
Advances in Engineering Software, Vol.13, pp.313-324.
